Adcraft JD-1 Instruction Manual Download Page 2

November 2018

 

 

 

 

 

 

WARNING:

 

1. This 

instruction 

manual 

is 

an 

integral 

part of the machine and must be kept 

for any further consultation.

 

2. This machine 

is 

a cold drink dispenser

.

 

3. This machine should be used only 

for 

the purpose for which it was designed

.

 

Any other use 

is inappropriate 

and, therefore, dangerous

The manufacturer 

will not be held responsible for any damage caused by improper 

use.

 

4. Before 

installing 

and operating on the machine, read carefully this 

operation manual.

 

5. Basic safety rules

:

 

a.  Do not touch the machine when hands or feet are wet.

 

b.  Do not use the machine when barefooted.

 

c.  Do not allow the machine to be used by children or untrained persons.

 

d.  Do not leave the machine outside.

 

e.  Do not pull on the electrical cord when unplugging the machine

.

 

 
The company reserves the right to modify 

the 

construction or appearance without 

notice

.

 

 

 

INSTALLATION:

 

Useful instruction for transport:

 

1. In order to prevent the oil contained in the hermetic compressor from flowing

 

into 

the cooling circuit

it 

is necessary to always carry

store and handle the 

machine in a vertical position following the 

instructions 

found on the packaging

.

 

2. If the machine was accidentally or purposely placed 

in 

a non-vertical position 

during transport

 b

efore operating the machine

it should be kept in a straight 

position for approximately 30minutes

 

to allow the oil to flow back 

into 

the 

compressor

.

 

Unpacking:  

 

 

Remove cardboard and plastic covering

.  

  Make sure that the machine has not been damaged.  

 

Remove the plastic film from all the stainless steel panels.

 

 

 

IMPORTANT:

  

The various packaging should be kept from children since  

they are potentially dangerous.

 

Summary of Contents for JD-1













Reviews: