ADC RF Wofx, User Manual

Page: 13 / 22

ADCP-61-813 • Issue 2 • February 2005
Page 7
© 2005, ADC Telecommunications, Inc.
Figure 7. Front View of RDS-AS (with Dimensioned Mounting Ears)
1. At the designated rack location, align the mounting holes in the switch mounting ears with
the threaded holes in the rack, then mount the redundant switch on the rack with four #12-
24 screws. (See
Figure 8 .)
Figure 8. Installing Redundant Switch in Rack
2. Using AWG 18 (or larger) stranded wire, connect frame ground to the frame ground screw
in the lower left corner of the rear panel (See Figure 9 ).
1.25 IN.
(3.18 CM)
1.75 IN.
(4.45 CM)
18.31 IN.
(46.51 CM)
18.98 IN.
(48.21 CM)
12214-A
CALIB
RATIO
N
NOR
MAL
SWIT
CHIN
G
THRE
SHO
LD
(-R)
B
A
SELECT
SELECT
STATUS
2A 240V
V: 38.4
–57.6
VDC/100/120/240
VA
C
Ø: 1
A: 1A MAX DC / 2A MAX A
C
HZ: 47
–63 HZ
UR
12216-A
OPER
ATIN
G
MAN
UAL
FAIL
URE