ADC Network Unit, User Manual

Page: 25 / 36

August 7, 2006 Chapter 3: Provisioning
AIWN-UM-7001-01 3-7
User and Privilege Settings
Purpose:
Defines users to the system.
Command: [SECURE privilege]
SET USER <name> RO|RW|SECURE <password>
CLEAR USER <name>
User name and passwords are specified as 1 to 15 alphanumeric characters.
Status Command: [SECURE privileges]
GET USERS
Performance and Alarms
Configure Alarm Thresholds
Purpose:
Configures the OAM alarm threshold and windows for CRC, Errored Symbol Period, Errored Frame Event, Errored
Frame Period, and Errored Frame Seconds Summary events.
Command: [RW,SECURE privilege]
SET [<interface>] <type> EVENT THRESHOLD <number> [WINDOW <number>]
• <interface> can optionally be specified to target a specific interface; when not specified, both interfaces are tar-
geted. <interface> must be either NETWORK or SUBSCRIBER.
• <type> is one of CRC|FRAME|FRAME PERIOD|FRAME SECONDS|SYMBOL PERIOD.
• <number> is an integer value whose range is dependent on the <type> and interface speed as specified by
IEEE 802.3ah. For convenience, MINIMUM and MAXIMUM are keywords that can be substituted for <number>
to set the values to the minimum and maximum values specified in IEEE 802.3ah.
• [WINDOW <number>] can be optionally specified; if not specified, the pervious value is retained.
Example:
SET FRAME PERIOD EVENT THRESHOLD 1
Example:
SET SUBSCRIBER CRC EVENT THRESHOLD MINIMUM WINDOW MAXIMUM
Status Command: [all privileges]
GET [NETWORK|SUBSCRIBER] EVENT THRESHOLD
GET [NETWORK|SUBSCRIBER] ALARM STATUS