ADC Modem MM701G, User Manual

Page: 50 / 108

Setting Up a Telnet Session
44 MM701G User Manual
S
ETTING
U
P A
T
ELNET
S
ESSION
Use a telnet client to set up a telnet session to the modem. To set up a telnet session, specify the
LAN IP address of the modem to establish communication. The default LAN IP address is
10.0.0.1. If this IP address has changed, contact your service provider.
Below is an example using Microsoft Windows 98:
1 Click Start , Run to access the Run dialog.
2 Enter the LAN IP address as a parameter to the telnet command, then click OK to start the
Windows telnet client and access the password prompt.
3 Enter the telnet password to access the Main Menu page. The default telnet password for the
MM701G is password .