MM701F Installation Guide
1
O
VERVIEW
The MM701F is a versatile, high-speed modem that connects your LAN to one or more service
providers. It employs ADSL technology for asymmetric rates up to 7.552 Mbps over single-pair
wiring and allows for multiple management options including an easy to use Web-based
interface. In addition, the MM701F supports 32 simultaneous Bridge/Router or Point-to-Point
(PPP) sessions to the same or different service providers over its ADSL WAN interface. For
sizeable deployment, the MM701F provides the ability to download pre-defined configuration
files to the flash memory instead of manually defining each and every value for all modems.
The MM701F also includes several useful protocols and services. If you require IP addresses to
be served dynamically on your LAN, use the built-in DHCP server. If you need to update your
modem software, use the built-in TFTP client. If you require private IP addresses and need to
translate them into public IP addresses, use the built-in NAT function. If you need to exchange
IP routing information with another device, configure and implement RIP.
Use this guide to install your MM701F and access the modem configuration. To configure the
MM701F, refer to the electronic copy of the Megabit Modem 701F User Manual on the
MM701F documentation CD. Before installation, verify the system requirements as described
in the section listed below.
S
YSTEM
R
EQUIREMENTS
•
PC with a 10Base-T Ethernet Network Interface Card (NIC)
•
TCP/IP protocol stack (see documentation for your operating system)
•
Web browser installed such as Internet Explorer (Version 4.0 or higher)
V
ERIFY
S
HIPPING
P
ACKAGE
C
ONTENTS
•
MM701F modem unit
•
6 Vdc power supply
•
Ethernet cable
•
Phone cord with RJ-11 connectors
•
Console cable and DB-9 console port adapter
•
MM701F documentation CD
