ADC AD-30x2 Series Installation Manual Download Page 3

113019- 7

www.adclaundry.com

3

Safety Precautions .................................................. 4

Specifications .......................................................... 6

Installation Procedures ........................................... 7

Unpacking / Setting Up ................................................ 7
Location of the Dryer ................................................... 7
Dryer Enclosure Requirements ................................... 7
Fresh Air Supply Requirements .................................. 8
Exhaust Requirements ................................................ 8
Electrical Information ................................................. 10
Gas Information ......................................................... 11
Preparation for Operation / Start-Up ......................... 12
Preoperational Test ................................................... 13
Preoperational Instructions ....................................... 13
Shutdown Instructions ............................................... 13

Service / Parts Information ................................... 13

Service ...................................................................... 13
Parts .......................................................................... 13

Warranty Information ............................................. 14

Warranty Registration ............................................... 14
Warranty .................................................................... 14
Returning Warranty Parts .......................................... 14

Routine Maintenance ............................................ 14

Cleaning .................................................................... 14
Adjustments ............................................................... 15

Data Label Information .......................................... 15

Procedure for Functional Check
of Replacement Components ............................... 15

Non-Coin Programming ........................................ 16

Coin Programming ................................................ 17

Table of Contents _________________

Proposition 65

Use of   this product could expose you to

substances from fuel combustion that contain

chemicals known to the State of   California

to cause cancer, birth defects and other

reproductive harm.

In the State of Massachusetts, the following
installation instructions apply:

Installations and repairs must be performed by
a qualified or licensed contractor, plumber, or
gasfitter qualified or licensed by the State of
Massachusetts.

If using a ball valve, it shall be a T-handle type.

A flexible gas connector, when used, must not
exceed 3 feet.

List of Acronyms _________________________

D.M.S.

Drill Measurement Size

HVAC

Heating, Ventilating, and Air-Conditioning

in WC

Inches of Water Column

L.C.D.

Liquid Crystal Display

L.E.D.

Light Emitting Diode

L.P.

Liquid Propane

OSHA

Occupational Safety and Health Administration

R.M.A.

Return Material Authorization

UL

Underwriters Laboratory

!

 WARNING

IMPORTANT

You must disconnect and lockout the electric supply and

the gas supply or the steam supply before any covers or

guards are removed from the machine to allow access

for cleaning, adjusting, installation, or testing of any

equipment per OSHA standards.
Please observe all safety precautions displayed on the

equipment and/or specified in the installation manual

included with the dryer.

CAUTION

Dryer(s) should never be left unattended while in

operation.

“Caution: Label all wires prior to disconnection when

servicing controls.  Wiring errors can cause improper

operation.”

«Attention: Au moment de l’entretien des commandes,

étiquetez tous les fils avant de les débrancher.  Des

erreurs de câblage peuvent entraîner un fonctionnement

inadéquat et dangereux.»

WARNING

Children should not be allowed to play on or near the

dryer(s).  Children should be supervised if near dryer(s)

in operation.
Under no circumstances should the dryer door switch,

lint door switch, or heat safety circuit ever be disabled.
Do not modify this appliance.
The dryer must never be operated with any of the back

guards, outer tops, or service panels removed.  Personal

injury or fire could result.
The dryer must never be operated without the lint filter/

screen in place, even if an external lint collection system

is used.
If the hi-limit switch trips, a service call is required to

investigate the reason and resolve the issue.

FOR YOUR SAFETY

Do not dry mop heads in the dryer.  Do not use dryer

in the presence of dry cleaning fumes.

The dryers must not be installed or stored in an area

where it will be exposed to water and/or weather.
The wiring diagram for the dryer is located in the front

electrical control box area.

Summary of Contents for AD-30x2 Series



















Reviews: