ADC 150-2248-01 User Manual Download | Manualshive

Page: 35 / 74

background image

150-432-100-02, Revision 02

Provisioning

HLU-432 List 1

July 18, 2002

27

Initiating a Loopback

To send one of the available loopbacks, press the appropriate letter in the Loopback Menu. The following prompt
appears:

PLEASE WAIT................

A series of dots moves from left to right indicating that the command has been issued. When this process
completes, the system returns to the Maintenance Terminal Main Menu. The selected loopback four letter
designation now appears in the Loopback Mode field in the Maintenance Terminal Main Menu (see

which an NLOC loopback is in progress). The loopback continues to cycle in the system depending upon your
Loopback Timeout setting.

Figure 11.

NLOC Loopback Mode Reported in the Maintenance Terminal Main Menu

Disabling a Loopback

The Disable Loopbacks option (

Figure 9 on page 26

) allows you to disable (cancel) any of the loopbacks listed in

the screen. To disable loopbacks, press

in the Loopback Menu. The following prompt appears:

PLEASE WAIT................

A series of dots moves from left to right indicating that the command has been issued. When this process
completes, the system returns to the Maintenance Terminal Main Menu where the Loopback Mode is identified
as None.

The Loopback Menu screen is also available at the HRU connected to the HLU-432, thus
allowing all HiGain System loopbacks to be initiated from either end of the circuit.

HI-GAIN HLU-432 MAINTENANCE TERMINAL MAIN MENU (ver V7.3L-1)
CIRCUIT ID#:

                         A. VIEW SPAN STATUS
                         B. SET CLOCK
                         C. SYSTEM SETTINGS
                         D. LOOPBACK MODE:  NLOC(HG)
                         E. VIEW PERFORMANCE DATA
                         F. VIEW PERFORMANCE HISTORY
                         G. VIEW ALARM HISTORY
                         H. VIEW SYSTEM INVENTORY
                         I. VIEW TROUBLESHOOTING

A

«
...
33
34
35
36
37
...
»

Summary of Contents for 150-2248-01











































































Reviews:

No comments

Related manuals for 150-2248-01

Mini Field Agent

Brand: GE Pages: 87

OfficeConnect 1600

Brand: 3Com Pages: 8

Brand: 3Com Pages: 8

MatrixPRO-II DVI 16x16

Brand: Barco Pages: 43

Brand: Barco Pages: 5

EK-FB GA AX370 Gaming RGB Monoblock

Brand: ekwb Pages: 2

MegaRAID SATA 300-4XLP

Brand: LSI Pages: 3

Sentry Global Security Modem

Brand: Server Technology Pages: 22

ADSL/ADSL2/ADSL2+ Router 660R-6xC Series

Brand: ZyXEL Communications Pages: 282

Brand: peplink Pages: 2

LBON320AC Series

Brand: Lindsay Broadband Pages: 4

Brand: Renesas Pages: 4

AlterPath Manager 2500

Brand: Cyclades Pages: 368

Brand: Cypress Semiconductor Pages: 9

Brand: FDI Pages: 15

Brand: Transition Networks Pages: 1

Brand: IBM Pages: 44

Brand: Ezquest Pages: 65

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands