ADC 150-2205-04, Installation And Verification Manual

Page: 40 / 112

Installing a Management Unit (HMU) 800-357-104-01, Revision 01
28 September 29, 2000 HMS-357 List 4 and List 5
Step Procedure Installer Check
ü ü ü ü
1 From your terminal emulation program, locate the release version as shown in Figure 19 .
•
For TL1 release version 3.04, proceed to Step 2 .
•
For TL1 release version 3.05, proceed to Step 3 .
H
2 At the prompt, enter
tao
and then press .
•
If the system is managing a multishelf configuration, the Network Status menu appears, disregard
rest of this procedure and proceed to
“Configuring the Management Unit” on page 29 .
• If the system is managing a single shelf configuration, the Shelf Status menu appears, disregard
rest of this procedure and proceed to
“Configuring the Management Unit” on page 29 .
Proceed to “Configuring the Management Unit” on page 29 .
If your shelf configuration does not appear, follow the bulleted procedure listed below if the following
message appears:
Please log on to local TL1 with proper privilege and re-type TAO.
–
At the prompt, press .
–
At the
Enter TID [Local]
prompt, enter the ID (if necessary) or press .
–
At the
enter username
prompt, enter
superuser
(default) and then press .
–
At the
enter password
prompt, enter
public#1
(default) and then press .
–
At the
<
prompt, enter
tao
and then press .
If the system is managing a multishelf configuration, the Network Status menu appears,
disregard rest of this procedure and proceed to
“Configuring the Management Unit” on
page 29 .
If the system is managing a single shelf configuration, the Shelf Status menu appears,
disregard rest of this procedure and proceed to
“Configuring the Management Unit” on
page 29 .
H
3 At the prompt, enter
tao
and then press .
H
4 At the
enter password
prompt, enter
public
(default) and then press .
•
If the system is managing a multishelf configuration, the Network Status menu appears, disregard
rest of this procedure and proceed to
“Configuring the Management Unit” on page 29 .
• If the system is managing a single shelf configuration, the Shelf Status menu appears, disregard
rest of this procedure and proceed to
“Configuring the Management Unit” on page 29 .
If your shelf configuration does not appear, follow the bulleted procedure listed below if the following
message appears:
Please log off of TL1 session and re-type TAO to login TAO.
– At the
<
prompt, enter
logoff;
– At the
logged out ok
prompt, enter
tao
and then press .
– At the
password
prompt, enter
public
and then press .
Proceed to “Configuring the Management Unit” on page 29 .
H
Installer Signature
? ? ? ?
Date
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER