150-504-100-03
Appendix A - Technical Reference
HRE-504 List 1, List 1B, and List 2
August 1, 2002
33
4
To avoid split pairs, tie or band the ends of the Group 1 and Group 2 pairs. Cut off pair ends and the cable
butt to aid in the removal of grease.
5
Separate pairs between the tied ends and the cable butt to aid in the removal of grease.
6
Remove grease by wiping the tied ends and the cable butt with a clean cloth or paper towel.
7
Keep cable pairs dry. Cover the exposed splice to protect it from the elements if it is left unattended prior to
completion.
When the air temperature is low, warm the cable pairs to aid in removing grease by cleaning the
stub in a heated enclosure or by using a heat gun to apply warm air to the pairs. Avoid applying
excessive heat, which could deform the insulation on the pairs.
Summary of Contents for 150-2202-01
Page 4: ...Inspecting the Shipment 150 504 100 03 iv August 1 2002 HRE 504 List 1 List 1B and List 2...
Page 8: ...List of Tables 150 504 100 03 viii Augusr 1 2002 HRE 504 List 1 List 1B and List 2...
Page 53: ...Appendix D Abbreviations 150 504 100 03 46 August 1 2002 HRE 504 List 1 List 1B and List 2...