background image

Revision History of This Practice

 

 150-504-100-03

ii

August 1, 2002

 HRE-504 List 1, List 1B, and List 2

R

EVISION

 H

ISTORY

 

OF

 T

HIS

 Manual

Copyright

August 1, 2002

© 2002 ADC DSL Systems, Inc. All rights reserved.

Trademark Information

ADC is a registered trademark of ADC Telecommunications, Inc. HiGain is a registered trademark of ADC DSL Systems, Inc. 
No right, license, or interest to such trademarks is granted hereunder, and you agree that no such right, license, or interest 
shall be asserted by you with respect to such trademark.

Other product names mentioned in this document are used for identification purposes only and may be trademarks or 
registered trademarks of their respective companies.

Disclaimer of Liability

Information contained in this document is company private to ADC DSL Systems, Inc., and shall not be modified, used, copied, 
reproduced or disclosed in whole or in part without the written consent of ADC.

Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice. 
In no event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits, and ADC further 
disclaims any and all liability for indirect, incidental, special, consequential or other similar damages. This disclaimer of 
liability applies to all products, publications and services during and after the warranty period.

Revision

Release Date

Revisions Made

01

January 20, 1999

Initial release

02

May 10, 2000

Changed from plastic to metal control valves and added HRE-504 List 1B. 

03

August 01, 2002

ADC Rebranding

Summary of Contents for 150-2202-01
























































Reviews: