ADC EcoWash ECOWASH-M2 User And Maintenance Manual Download Page 2

2

113687- 3

1

INTRODUCTION

Dear customer,

Thank you for the confidence you have placed in our product. We hope it meets your needs.

ADC products embody advanced concepts in engineering, design, and safety. If this product is properly maintained,
it will provide many years of safe, efficient, and trouble free operation.

The warranty, as explained in the warranty sheet shipped with the washer covers it against defects in materials and
workmanship.  It does not cover damage to glass components; to consumables (seals, bulbs, etc.); damage due to
the incorrect installation of the appliance; to inappropriate use, to inadequate maintenance or poor repair processes.

This appliance is subject to changes and modifications for its technical progress.

RETAIN THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included
with the washer.

The following “FOR YOUR SAFETY” caution must be posted near the washer in a prominent location.

FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d'essence ni d'autres vapeurs ou liquides inflammables à proximité de cet appareil ou de
tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to
make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.  The illustrations included in this manual may not depict your particular washer exactly.

IMPORTANT

For your convenience, log the following information:

DATE OF PURCHASE _____________________________________________ MODEL NO. ________________

RESELLER’S NAME

___________________________________________________________________________________

Serial Number(s) _____________________________________________________________________________

__________________________________________________________________________________________

__________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the
factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department
at (508) 678-9000. Please specify the washer model number and serial number in addition  to  the description and
part number, so that your order is processed accurately and promptly.

Summary of Contents for ECOWASH-M2























Reviews: