113687- 3
15
5
COIN/CP MODE
5.1
Operation
The configuration of the machine is different for self-
service models.
As long as the left-hand control door lock is closed,
the machine will be configured as a self-service
machine. Therefore the user will only be able to
select the required program and start the machine.
By default, only 6 programs are activated:
Self-service programs
P1
Cold
P2
Warm (104ºF)
P3
Hot (140ºF)
P4
Delicates
P5
Extended cold wash
P6
Extended hot wash
(140ºF)
P7
OPL (programmable)
In order to use P7, it is necessary to change to
CREDIT MODE or go to CONF/PAY and activate the
OPL option.
To change the washer extractor configuration, go to
CONF/PAY (see section 5.5.8) and select the required
option.
The different functions in each case are shown below:
5.2
Pay center/card
Use this option if the washer extractor is a pay center or
card model.
Program execution
In order to carry out a wash program, the following steps
should be followed:
1- Place dirty washing in the machine.
2- Close the door.
3- Add detergent.
4- Insert card or coins in the pay center.
5- Select program.
6- Press START.
The price rate is the same for all the programs. To
change the price, please see the pay center manual or
the card reader if using card payments.
5.3
COIN
Use this option if the machine has a coin slot.
In order to carry out a wash program, the following steps
should be followed:
1- Place dirty washing in the machine.
2- Close the door.
3- Add detergent.
4- Select program.
5- Confirm price.
6- Insert the coins.
7- Press START.
The program number and price are shown on the screen
intermittently; use the INC and DEC (
∧,∨
) keys to change
the program and the price will be updated. If, after five
minutes there has not been any activity in the keys or in
the coin slot, the P1 price is displayed continuously until
any button is touched or a coin is inserted.
This type of coin slot allows you to allocate a price to
each program; the configuration menu has two
submenus, CUR and PRIC, allowing you to define the
currency and the price respectively (see sections 5.5.6
& 5.5.1).