ADC EcoWash ECOWASH-M2 User And Maintenance Manual Download Page 19 | Manualshive

Page: 19 / 22

ADC EcoWash ECOWASH-M2 User And Maintenance Manual Download Page 19

113687- 3

19

5

Bosnia and Herzegovina

Bangladesh

Switzerland

Dominican Republic

Russian Federation

1

7

Slovenia
Taiwan

8

Iran, Islamic Republic of

French Polynesia

9

NOTE: This list is continuously updated, if you cannot find your country in the
list, please ask your distributor for the latest available update.

5.5.7

TiMr (Wash time remaining)

This indicates the time remaining until the program ends.
The default setting is ON for all the programs, but if the
StOP option (Thermal stop, see section 5.5.10) is
activated, the remaining time option is automatically
deactivated.

5.5.8

PAY (Operating mode)

This allows the machine operating mode to be changed
between CP MODE, COIN MODE & OPL MODE (see
section 5.4).

AVAn (Advance cycle)

This option is only available in OPL MODE. The key >
can be deactivated, to prevent the advance of a cycle
thus ensuring the wash program is completed correctly.
By default, it is ON.

5.5.10 StOP (Thermal stop switch)

This option is only available in OPL MODE. When the
thermal stop switch is activated, the cycle time does
not start until the programmed temperature has been
reached in order to guarantee the wash cycle is correctly
completed; this switch can be deactivated so that the
time is counted from the moment the programmed level
is reached. The default setting is OFF.

5.5.11 Grd (Change between °F & °C)

This option is only available in OPL MODE. This
submenu allows you to select the temperature display
in degrees Fahrenheit (°F) or degrees Celsius (°C). The
default setting is degrees Fahrenheit.

5.5.12 Beep (Acoustic signal)

This option is only available in OPL MODE. This allows
you to switch the acoustic signals on or off. By default,
they are ON.

5.5.13 deLA (Cycle Stop Grace Period)

This option is only available in self service modes. This
allows the grace period for the cycle stop to be set. The
default time is 1 minute. The allowable range is from 0
to 9 minutes.

«
...
17
18
19
20
21
...
»

Summary of Contents for ECOWASH-M2























Reviews:

No comments