INSTALLING BATTERIES
1. On the back of the remote control, push the tab and lift off the battery cover.
2. Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert
them.
3. Align the covers keys with the cases holes and press the cover ba ck into place. The tab should click when the
cover is locked.
4. Test the remote control by pressing any mode key (e.g. ,
TV
). If the batteries are inserted correctly, the LED (red
light) will blink once.
NOTE:
When batteries need replacement, the remote control will cease to operate. Replace the batteries
and the unit will be restored to its full functionality, complete with your favorite settings.
PROGRAMMING DEVICE CONTROL
The Potenza ST Universal Remote Control is preprogrammed to operate the set-top box provided by your television
service provider, an RCA TV, a Toshiba DVD player, an RCA VCR, and a Pioneer audio receiver. To control devices
other than the default brands, perform the following steps; otherwise skip this section.
NOTES:
For control of a Combo device (for example, a TV/VCR combo), skip this section and per-form
the instructions on “Setting Up a Combo Unit” on page 9. Also refer to “Device Table” on page 7 to find
out which devices can be programmed onto each device key. If you have another brand of set-top box you
would like to control, you’ll need to unlock the STB ID Lock before changing the set-top box code (see
“Programming ID Lock” on page 12).
1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc).
NOTE:
Please read steps 2 through 5 completely before proceeding. Highlight or write down the codes
and device you wish to program before moving on to step 2.
2. On the remote control, press a device key once (i.e.,
VCR, DVD, AUD, TV,
or
STB
); it will blink once.
3. Press and hold
SETUP
until the selected mode key blinks twice, then release
SETUP
.
4. Use the “Manufacturer’s Codes” starting on page 17) to locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly, the selected mode key will blink twice.
8
