ADB MIKADO, User Manual

Page: 25 / 36

MIKADO USER MANUAL
www.adblighting.com User Manual - page 23
Issue 1.0
6.5.5 TO ACTIVATE EXTERNAL TRIGGER TO RUN A CHASE
To link the External Trigger Input to activate the Chase, hold down [function] tap [extern],
then release [function].
6.5.6 TO ACTIVATE AUDIO INPUT TO RUN A CHASE
To link the Audio Input to activate the Chase, hold down [function] tap [bass], then release
[function].
6.5.7 TO ADD A STEP IN A CHASE
Edit the Chase (above) then press and hold the [start/stop/step] button and tap the [F/ A]
button (step number) to advance the Chase to the step where the new step is to be added.
The new step will be inserted prior to the selected step. In order to add a step onto the end of
a chaser select the 181 step and the new step will be inserted onto the end of the chaser.
Whilst holding down the [function] button, press [add], then release [function]
The RECORD SCENE LED will flash to indicate that you can record a snapshot of the
output. To add a previously recorded Scene as a step, press [PAGE] (optional to select the
page containing the Scene) then press [F/A] (Scene number).
To add a snapshot as a step, create the look on the output and then press [record scene].
HINT: when recording a snapshot of the output as a step, remember to keep the Chase
faded down so that it is not included in the new step.
The new step has now been added.
6.5.8 TO DELETE A STEP IN A CHASER
Edit the Chaser (above) then press and hold the [start/stop/step] button and tap the [F/A]
button (step number) to advance the Chaser to the step that is to be deleted.
Whilst holding down the [function] button, press [delete], then release [function].
The step number selected above will now be deleted. If you delete all the steps of a chaser
then the MIKADO keeps a blank (blackout) step as the first step, to enable the editing and
inserting of new steps.
6.5.9 TO CHANGE THE SPEED OF A CHASER
The recorded speed will be displayed by the flash rate of the SPEED LED indicator. If the
speed has been recorded at zero level, then the LED will be permanently lit. To adjust the
recorded speed, rotate the [speed] rotary fader clockwise/counter clockwise until the LED
illuminates. This indicates that you have matched the recorded value and the rotary fader is
now controlling the speed.
6.5.10 TO CHANGE THE CROSSFADE TIME OF A CHASER
To view the recorded crossfade level of a Chaser, rotate the [crossfade] rotary fader
clockwise/counter clockwise until the LED is lit. This will indicate the recorded level. The level
is now under the control of the rotary fader and any adjustments will now be saved in the
Chaser memory.
6.6 DELETE A CHASER
To delete a Chaser,
press [record chaser] [F/A] (Chaser number to be deleted) [record chaser].