ADB EURODIM TWIN TECH, User Manual, Page: 24 / 96

EURODIM TWIN TECH
Page 22 sur 92
−
DMX A/B present: Yes;
•
Yes: DMX signal reception detected
•
No: DMX signal reception missing.
−
Patch A/B (see "PATCH" menu):
•
Yes: the addressing filled-in in each patch at the circuits is not in ascending order,
•
No: the addressing filled-in in each patch at the circuits is in ascending order,
e.g. 1, 2, 3, 4, ..., 128 where 32 modules of four circuits are present in the cabinet.
−
DMX A/B fail: action implemented in the absence of an DMX A/B signal (see "Priority/DMX
fail" menu), three actions are possible:
•
"last value": the last values received to control the circuits are used on a permanent basis as
long as the DMX signal is missing,
•
"cue 0:" the DMX signal channel values are replaced by the content of cue 0 with a fade time
of cue 0 and will be played as long as the DMX signal is missing,
•
"black": the control value of each circuit fades to black in five seconds.
When the DMX signal is present again, we return to the DMX values with a five-second fade.