ADB Safegate REIL-L, User Manual

Page: 51 / 60

6.0 REIL A/E Parts
To order parts, call ADB Safegate Customer Service or your local representative. Use the parts lists, and the accompanying
illustration, to describe and locate parts correctly.
Ordering Code
Style
A = High-intensity, one brightness step
C = Low-intensity, one brightness step
E = Three brightness steps
Power
1 = L-849I, current-driven
2 = L-849V, voltage-driven
Current Sensing Option 1
0 = Without current sensing
1 = With current sensing
Flash Head Mounting
0 = Integrated with enclosure (Style A, C, or E)
1 = Separate mounting on a 2” EMT (Style C only)
Enclosure Mounting
1 = Single leg
2 = Two legs
0
Enclosure Type
1 = Steel (Painted Aviation Orange)
2 = Stainless Steel (Not ETL Certified)
LED Configuration
0 = Style C
1 = Style A/E (48 LEDs)
2 = Style 3 (A/E/C)
Note:
1
The current sensing option provides ON/OFF control (L -849(L) Style
A/Style C) or 3-step intensity control (L-849(L) Style E) of the REIL system
depending on the current level in the series lighting circuit. The L -849I
(powered by a CCR) doesn’t require a separate isolation transformer –
The input current from the isolation transformer that powers the Primary
cabinet is also used for current sensing control. The current s ensing
input of an L-849V (voltage-powered) can be connected to 6.6 A or 20 A
series circuits with an appropriate 6.6/6.6 A or 20/6.6 A isolation
transformer.
REIL - X X X X X 0 X X
96A0461, Rev. H, 2019/10/31 41
Copyright
©
ADB Safegate, All Rights Reserved