Note:
If the Timer is enabled, (see Section 11 “Setting the Clock and Timed Events)
the sign will run in Violator Mode (or any other mode) only during the selected
event timed program. Otherwise, if the timer is disabled, the sign will run
continuously
(not recommended for overly long periods of time when on battery power only).
“Violator Alert”
Violator Alert 1: MS - Minimum Speed
After seeing the “VA” screen, the display will show “MS” (see photo below) along
with a number. The number represents the lowest speed at which the display will
start showing all oncoming vehicles. When this number appears, the operator
has 5 seconds within to start pushing the button in order to program this “MS”
speed setting. Press the button until the desired speed setting is reached. (
Note:
If the button is held down, the numbers will increment fast without having to
press the button many times. The numbers will start over after 99 if you miss your
desired speed without turning off the power. If using the key chain remote,
simply press either button to move the numbers forward or backward). Once the
desired setting is reached,
stop and
wait
for the next screen to appear after
approximately 5 seconds. The screen will then change to the next screen for
speed setting.
“Minimum Speed”
Violator Alert 2: SL - SLOW (Optional Feature)**
Check your packing slip or order to verify that this optional feature has been
included with your product. If this feature was ordered, the display will now show
the red “SL” (Slow) message and show a speed setting number. The red “Slow”
message is effective in helping to calm traffic. When the operator sees the setting
number appear, push the button within 5 seconds in order to change this number
until the desired speed setting is reached.
Note:
You can set the numbers even
when the words “Slow” are flashing. Once the desired setting is reached, stop
pressing the button and wait for the next screen, after approximately 5 seconds.
Adaptive Micro Systems LLC | 7840 North 86th Street | Milwaukee, WI 53224
Phone (800) 558-7022 | AdaptiveDisplays.com
