Mounting
Bolt located
by white
arrows
Use 5/16
wrench for
tightening nuts
Mounting
Bolt located
by white
arrows
Use 7/32 Allen Wrench
to fasten bolt. Use
7/16 wrench for
tightening nylon nuts
behind foot buckets
Now locate the footwells. Each footwell has the mounting nuts and bolts installed for shipping.
Please remove them now and set them aside to be used when the footwell is installed. Each
footwell is universal, meaning there is no right side / left side designation. Mount each footwell
by bolting it onto the Axiom as shown in the photo. On the Axiom is a set of holes that will allow
you to adjust the height and side to side angle of each footwell. You will need to determine the
correct height and angle of you application. Please allow at least 1 empty hole between
mounting bolts for strength and security.
www.adaptivestar.com 1-800-278-9686
Foot Bucket and Fender are in their own box packed inside the box with the chair
.
Now find the front wheel fender and install it onto the four bolt studs as shown in the photo.
Note: the retaining nuts for these bolts have been installed for shipping. Please remove them for
installing the fender. Once the fender is installed, tighten the nuts onto the bolts with a wrench.
Tighten “Snuggly” being cautious to not over
tighten them.
