First unlock the rear brake by
Pulling the black loop upwards
Rear Wheel Installation
Next, push the
black button and
while holding it in.
Insert the wheel
axle all the way into
the pushchair
frame and release
the button.
Now repeat to
install
the other wheel.
Start by tipping
the push chair
backwards so
the fork
assembly is
pointing upward.
This will make it
easier to install
the wheel.
Front Wheel Installation
The front wheel is the
same as a bicycle. Place
the tire be- tween the
brake pads and orient your
wheel so that the flat
sections of the wheel axle
align with the slotted
metal fork tips and push
the wheel so that it seats
all the way in the back of
the fork tip
Position the silver
lever straight out
from the
frame as shown.
Now tighten the
black knob on
the opposite side
of the lever until it
just starts to
become snug.
Now swing the lever
closed as shown here.
If you are unable to
swing
the lever completely
into the locked
position, open it back
straight out, loosen
the black knob
slightly, and close the
lever again.
