Adaptive Recognition Einar 5 User Manual Download Page 34

Page: 34 / 38

Page 34/38

EINAR 5

USER MANUAL

Adaptive Recognition

America

Adaptive Recognition

Hungary

Adaptive Recognition

Nordic

Adaptive Recognition

Singapore

[email protected]

WWW.ADAPTIVERECOGNITION.COM

6.11.

ANALYTICS / DETECTORS

The camera detectors can be added, modified or deleted on this window.

The list of the detectors differs by camera types except for Motion detector which can be found on all

types.

Motion detector and general use of masks

The Motion detector is a fundamental detector which regulates the motion-based storage. It cannot

be deleted.

If you click on the detector, then on the live stream a mask can be applied which can be set to exclusive

or inclusive with the "Masks Type" option. If the mask is set to "Exclude", then any recording will not

be taken about the motion on the highlighted area. If the mask is set to "Include", then recordings will

be taken about the motion on the selected area.

The Motion detector does not induce event, it is responsible for the setting of the
motion-based recordings. It can be found on all camera types.

Summary of Contents for Einar 5







































Search results

Summary of Contents for Einar 5

Reviews:

Related manuals for Einar 5

Brands by name

Popular brands

Adaptive Recognition Einar 5, User Manual

Search results

Summary of Contents for Einar 5

Reviews:

Related manuals for Einar 5

Brands by name

Popular brands