Adaptive Micro Systems FAST 350 User Manual Download Page 16

Page: 16 / 20

13. OPTIONS and UPGRADES

Powder coat finish in a variety of colors

RU2 Traffic Count Data Acquisition System with software

Solar Energy Package w/Panel, charger, and mounting bracket

“SLOW DOWN” violator alert

Red-Blue flashing bars violator alert

WARRANTY

RU2 Systems warrants parts and workmanship on the LED display for (5) years. The

radar unit is warranted by the manufacturer for 2 years. On-site labor is not included.

Parts are repaired within five business days of receipt, and include ground service

shipping (within the U.S. only). Warranty does not include physical damage from

misuse, acts of nature, terrorism or vandalism. Wear and tear items such as tires are not

covered. Please forward any warranty issues to the

Shipping Address

found in

Section 16

Please call for authorized RMA before returning any parts.

15. TROUBLE SHOOTING TIPS

1. If no speed is displayed:

a) Check power and/or battery(s), if applicable. Battery(s) should be outputting

at least 12 volts.

b) On solar powered units - check solar regulator indicator lights, if applicable.

Check the power to the charger from your solar panel and power out from

the regulator to the battery measures higher than 12 volts. If solar panel is

shaded, batteries may fail prematurely and/or sign will not operate

continuously.

c) Check your “Set Time” feature and be sure your clock is set properly to

display at the correct times. If in doubt, disable the set time feature.

d) Make sure sign is not set in “ND” – No Display mode.

2. If a “NR” is displayed:

Please note the radar can be accessed via a panel on the back side of the LED display.

Use the “L” key to remove the tamper resistant screws and slide the cover over.

a) Check the radar gun connector to be sure of a good connection.

b) Check the indicator light on the back of the radar unit:

•

A solid red LED indicates a vehicle traveling away from the unit is

being measured.

•

A solid Green LED indicates a vehicle traveling towards the unit is

being measured.

•

A flashing red LED indicates power but no target is being acquired.

Adaptive Micro Systems LLC | 7840 North 86th Street | Milwaukee, WI 53224

Phone (800) 558-7022 | AdaptiveDisplays.com

Summary of Contents for FAST 350





















Search results

Summary of Contents for FAST 350

Reviews:

Related manuals for FAST 350

Brands by name

Popular brands

Adaptive Micro Systems FAST 350, User Manual

Search results

Summary of Contents for FAST 350

Reviews:

Related manuals for FAST 350

Brands by name

Popular brands