Adaptive Micro Systems Alpha 4000 RGB MNS B Series Installation Manual Download Page 15

Page: 15 / 16

LPHA

4000 RBG MNS, P

E I

NSTALLATION

ANUAL

(PN 1776610301 R

. A)

1-15

Alpha 4000 RBG MNS PoE

AINTENANCE

The following information should display on the sign if oOh! Media Player is installed:

Maintenance

Notice: Always disconnect the communication cable before disconnecting the power cord.

Routine cleaning

Use only a soft, lint-free cotton cloth to clean the sign. Do not use soap and water, alcohol, cleaners with alcohol, or any
other strong solvent.

Service and Repair

There are no user serviceable parts in this sign. Contact Adaptive Displays for service and repair information.

Sign display

Meaning

LNXv1.5.7
10.11.11.254

Operating system type and version with IP seen below, one octet at a time.

Summary of Contents for Alpha 4000 RGB MNS B Series

















Search results

Summary of Contents for Alpha 4000 RGB MNS B Series

Reviews:

Related manuals for Alpha 4000 RGB MNS B Series

Brands by name

Popular brands

Adaptive Micro Systems Alpha 4000 RGB MNS B Series, Installation Manual

Search results

Summary of Contents for Alpha 4000 RGB MNS B Series

Reviews:

Related manuals for Alpha 4000 RGB MNS B Series

Brands by name

Popular brands