Main Unit Functions
When radar or laser signals are detected, the detected band and its strength will be
displayed, along with its distinct sound alert.
Power Button
Press the Power Button for 2 seconds to turn the unit on or off.
Mode Button (upper left button)
For City/Highway Mode, each time this button is pressed it will toggle between
“
City
”
and
“
Highway
”
modes, and the display will display the mode setting selected. A beep will be
emitted with each mode change.
For Peripheral Control Mode, each time this button is pressed for 2 or more seconds it will
toggle between
“
Headset Volume Control
”
(Vol), and
“
Visual Alert Brightness Control
”
(LED) with the following displays:
The display for the toggled Peripheral Control Mode will only be displayed on the LCD for
2 seconds, then the display will revert back to either
“
City
”
or
“
Highway
”
, unless a signal
is being detected.
The Peripheral Control Mode affects how the
“
Up
”
and
“
Down
”
buttons function, which
will be explained later in this document.
Alert Off/Dim Button (lower left button)
If a radar or laser signal is detected, pressing this button will temporarily mute all audio
alerts (main unit and headset) and stop the LEDs on the Visual Alert from flashing. Audio
and visual alerts will be stopped for the duration of the detected signal and any new
signals detected within the next seconds. When this button is pressed,
Summary of Contents for P0101
Page 10: ... FCC ID VWV P0101 ...