LED Intensity to be adjustable from Main Unit buttons as well as photo sensor.
Flash frequency to correlate with signal strength.
Memory Retention
Electronically remembers all your own settings for a certain period of time
after power-
off.
V. TROUBLESHOOTING GUIDE
PROBLEM:
No display or audio.
• Check fuse in the plug and replace if necessary with a 2 amp type.
• Check fuse for lighter socket; replace if necessary.
• Make sure lighter socket is clean.
PROBLEM:
Unit alarms when vehicle hits bumps.
• Check for loose lighter socket; tighten and clean.
• Check connections at both ends of power cord. Substitute another cord to determine if
cord is defective. Return defective cord to the factory.
PROBLEM:
Unit alarms when using vehicle equipment or electrical accessories
(brakes, power mirrors/windows, directionals, horn, etc.).
• Vehicle’s electrical system, including battery and alternator, may have electrical noise.
Install a filter capacitor (470mfd. 25 volt or larger capacitance value) on the back of the
lighter socket.
Factory setting
All user features can be reset to factory settings. Please follow below steps for reset.
1. Unplug Power Cord from unit
2. Press and hold Power and Mute/City Key.
3. Plug Power Cord into unit.
4. Wait for 2 beeps.
5. Release Power and Mute button. Unit is now reset
- Factory reset -
• Highway Mode On.
• Dim/Dark Mode to full illumination of display.
Summary of Contents for P0101
Page 10: ... FCC ID VWV P0101 ...
