manualshive.com logo in svg

Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

The Adaptec 5325301507 - Snap Server 4400 NAS is a powerful storage solution for your business needs. Make the most out of its features by referring to the comprehensive Administrator's Manual. Download this manual for free from our website and unlock the full potential of this remarkable product.

Share
Download
background image

TCP/IP Options

24

SnapServer Administrator Guide

Switch 
Trunking

This mode groups multiple physical Ethernet links to create 
one logical interface. Provides high fault tolerance and fast 
performance between switches, routers, and servers.

Link 
Aggregation 
(802.3ad)

Like Switch Trunking, this mode groups multiple physical 
Ethernet interfaces to create one logical interface, and 
provides high fault tolerance and fast performance between 
switches, routers, and servers.  Uses Link Aggregation Control 
Protocol (LACP) to autonegotiate trunk settings.

Enable 
Ethernet

Checked

By default, all Ethernet ports are enabled, whether they are 
used or not.

Unchecked

Ports other than the Primary Interface (by default Ethernet1) 
can be disabled by selecting the port and unchecking the 
Enable Ethernet checkbox. However, a bonded Ethernet port 
cannot be disabled, nor can a disabled Ethernet port be placed 
in bonded mode.

Note  

The primary Ethernet port must always be enabled. 

GuardianOS will not allow you to disable it.

Speed/
duplex

Auto

The default setting of 

Auto

 enables automatic negotiation of 

the speed and duplex settings based on the physical port 
connection to a switch. The speed setting establishes the rate 
of transmission and reception of data. The duplex setting 
allows the Ethernet port to transmit and receive network 
packets simultaneously.

Note  

Auto is the only allowable setting for a Gigabit port.

Fixed

The SnapServer may also be set to fixed speed/duplex setting: 
10Mbps/half; 10Mbps/full; 100Mbps/half; 100Mbps/full

Note  

To prevent connectivity problems when changing to a 

fixed setting, see “Changing from Auto to a Fixed Setting” on 
page 27.

Primary 
Interface

By default, the primary Ethernet port is Ethernet1 and it cannot 
be disabled. However, the Primary Interface can be changed to 
a different Ethernet port by selecting the Ethernet port you 
want to make Primary and putting a check in the Primary 
Interface box.

The Primary Interface is prioritized for various network 
configuration parameters that apply to the server as a whole 
(e.g., DNS IP address, hostname, and default gateway). In 
addition, the IP address of the Primary Interface is preferred to 
identify the server for various services and circumstances that 
require a single IP address. 

Option

Setting

Description

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Reviews:

No comments

Related manuals for 5325301507 - Snap Server 4400 NAS

IBM BladeCenter HS23 User Manual preview
BladeCenter HS23
Brand: IBM Pages: 30
IBM System x3950 X6 Product Manual preview
System x3950 X6
Brand: IBM Pages: 53
dixell XT120C Installing And Operating Insructions preview
XT120C
Brand: dixell Pages: 4
NETGEAR RP614 v2 Installation Manual preview
RP614 v2
Brand: NETGEAR Pages: 2
IBM TS3400 Maintenance Information preview
TS3400
Brand: IBM Pages: 295
Buffalo HD-H0.6TGL User Manual preview
HD-H0.6TGL
Brand: Buffalo Pages: 80
Planet IGS-5225-20T4C2X Quick Installation Manual preview
IGS-5225-20T4C2X
Brand: Planet Pages: 16
LaCie 2big Thunderbolt User Manual preview
2big Thunderbolt
Brand: LaCie Pages: 72
i-MO OptiBond 210 C Series Hardware Installation Manual preview
OptiBond 210 C Series
Brand: i-MO Pages: 16
Dot Hill AssuredSAN 4004 Series Fru Installation And Replacement Manual preview
AssuredSAN 4004 Series
Brand: Dot Hill Pages: 59
Buffalo TeraStation WSS WS5020N6 User Manual preview
TeraStation WSS WS5020N6
Brand: Buffalo Pages: 115
IBM TotalStorage Network Attached Storage 300G User Reference preview
TotalStorage Network Attached Storage 300G
Brand: IBM Pages: 86
Avaya S3210 Manual preview
S3210
Brand: Avaya Pages: 84
ASROCK Rack 4U60L Series User Manual preview
4U60L Series
Brand: ASROCK Rack Pages: 51
NETGEAR DGND4000 Datasheet preview
DGND4000
Brand: NETGEAR Pages: 3
Western Digital Ultrastar Serv60+8 User Manual preview
Ultrastar Serv60+8
Brand: Western Digital Pages: 406
Ubiquiti 3GStation Professional Quick Start Manual preview
3GStation Professional
Brand: Ubiquiti Pages: 24
MSI WindBOX Series User Manual preview
WindBOX Series
Brand: MSI Pages: 18

Brands by name

Popular brands

Load more brands