Appendix E: Using the Adaptec Flash Utility
●
118
4
Select
Select an Operation
.
5
Choose the operation you want, then follow the on-screen
instructions to complete the task:
●
Update
—Updates all the flash components on a RAID controller
with the flash image data from the UFI file.
●
Save
—Reads the contents of a RAID controller’s flash
components and saves the data to a UFI file, which you can use to
restore a RAID controller’s flash if required.
●
Verify
—Reads the contents of a RAID controller’s flash
components and compares it to the contents of the specified UFI
file.
●
Version
—Displays version information about a RAID
controller’s flash components.
●
List
—Lists all supported RAID controllers detected on your
system.
6
Complete the flash operation and restart your computer before
trying to use the RAID controller again. (You can not use your RAID
controller while you are updating its flash.)
