104
PROGRAMMING
Tip:
Programming the year, date and time
can also be done by connecting the
robot to the app rather than via the
display on the robot. When connected
via the app, the time and date are set
automatically. See the section ‘Setting
up the app’.
Start by setting the year, date and
time, as this is the basis for program-
ming
The setting starts with year, date and
finally time. To enable year, date and
time setting, press on
for 5 sec-
onds until the
icon lights up and
the numbers in the display flash, then
set the year using
or
and
to confirm each number until the year
is set correctly. The same procedure is
used for date and time.
Note however that the date setting
always starts with the month and then
the day. In the picture example below,
the date is August 25 (08.25). When the
year, date and time are saved,
appears on the display.
SETTING THE PIN CODE
To change the PIN, press
and
at the same time for 3 seconds. The
icon will now light up and ‘PIN 1’ will
appear on the display. You will now
need to enter the old PIN, which you do
by using
or
and
to con-
firm each number until the old PIN is
entered. ‘PIN 2’ will now appear on the
display and the new PIN is ready to be
entered in the same way as the old PIN
(in the picture example below it is 1234).
When the new PIN is entered and
appears on the display, the
new PIN has been saved.
