background image

February 2012 

80-0180-327 Rev. F 

80-0180-327 Rev. F 

19 

February 2012 

Adams Rite Manufacturing Co. (hereinafter ADAMS RITE) manufactures its 
products in a manner to be free of defects. Should any defect of manufacture 
(in material or workmanship) occur in its products, ADAMS RITE, upon 
prompt notification and proof to its satisfaction that the product was defective 
in manufacture for the use intended by   ADAMS RITE, will at its option, ex-
change the product, repair the defect or refund the price charged by ADAMS 
RITE, FOB factory based on the following schedule: 
 

All mechanical products for five (5) years from the date of manufacture; 
All electrical products (including EL and ED exit devices) for three (3) 

years from the date of manufacture; 

The RITE Door

®

 for five (5) years from the date of manufacture;  

UltraLine Electric Strikes for five (5) years from the date of manufacture. 

 

Limitations and exclusions

:  This is a limited warranty and is in lieu of all 

other     warranties including the implied warranties of merchantability and 
fitness for use) and under no circumstances shall ADAMS RITE be liable for 
any incidental or consequential damages or losses. 
 
This warranty covers products as outlined above manufactured from May 1, 
2003 forward. 
 
This warranty does not cover damages from such causes as abuse, accident, 
neglect, fire or freight damage. 
 

WARRANTY CONDITIONS 

The selling dealer from who this exit device was purchased is responsible for 
advising the purchaser of the period of no charge warranty exchange, repair 
or refund.  Replacement parts under the terms of the warranty must be fur-
nished by the Adams Rite dealer or agency. 
 

FACTORY ASSISTANCE 

If the purchaser is unable to locate a service agency, or if the purchaser does 
not receive satisfaction from the source of which the exit device was pur-
chased, or from local dealer, write or contact Adams Rite at the following ad-
dress: 
 

Adams Rite Manufacturing Co. 
260 Santa Fe Street 
Pomona, CA 91767 
Phone:  800-872-3267 
Fax:  800-232-7329 

 

Summary of Contents for eForce 3090C











Reviews: