Adams Fiber MediaRoom, User Manual

Page: 9 / 48

WATCHING TV
The device selection buttons tell your remote whether you want
to control your set top box or your television. Note: your remote
control must have the remote code programmed before it can
send the correct signals for your TV. If the list of TV brand
codes was not included in your installation pack, please
contact subscriber support or see the notes at the bottom of
this page for programming information. Note: remotes are
multifunctional (DVD, audio, TV, STB). If you’re having
difficulties, press the STB button before desired command.
After pressing the STB button, wait a moment before pressing
the next command.

To turn both your TV and STB on or off, press the Watch TV
button at the top of your UEI Eclypse remote.

To turn only your TV on or off, press the TV button then the
power button.

To turn only your set top box on or off, press the STB button
and then the power button.
Turn Your Set Top Box or TV On or Off
Changing Channels
The CH ^/v button will change channels up or down one at a
time.
The Number Pad can be used to directly enter a channel
number.
Mediaroom also gives subscribers the option to browse other
channels while watching TV. Pressing the down arrow button
will bring up the Info Bar. From there, you can use the up and
down arrows to surf through the surrounding channels to see
what is on. Once you find what you want to watch, press your
OK button to go to that channel.
3