13.1.5
SELECTION OF BAUD RATE
•
The fifth parameter is to select the baud rate per second
which is the speed of sending data to RS-232 interface.
Display will show “
b 9600
” (DEFAULT SET)
•
Use
the
[Tare/Zero]
key to scroll through the options.
•
There are three options-
•
Press
the
[Unit]
key to confirm the selection and move to the
next parameter.
13.1.6
SELECTION OF BIT RATE AND PARITY
•
The sixth parameter is to select the bit rate and parity used
for sending data to RS-232 interface. Display will show “
PAr
1
” (DEFAULT SET)
8 bits no parity
7 bits even parity
7 bits odd parity
•
Use
the
[Tare/Zero]
key to scroll through the options.
•
Press
the
[Unit]
key to confirm the selection and move to the
next parameter.
© Adam Equipment Company 2008
19
