© Adam Equipment Company 2008
14
The scale can be controlled by a computer using the following
commands. The commands must be sent in upper case letters,
i.e. “
T
” and not “
t
”. The input and output formats are as given below.
Input commands format:
Z <cr> <lf>
Tares the scale to display the net weight- same as
pressing
[Tare/Zero]
H <cr> <lf>
Sets the scale to hold if the hold function is enabled.
Same as pressing the
[Hold]
key
N <cr> <lf>
Sends the net weight to the RS-232 interface.
G <cr> <lf>
Sends the gross weight to the RS-232 interface.
T <cr> <lf>
Sends the tare weight to the RS-232 interface.
Output format:
G
+ 2.00 kg
<cr><lf>
N
+ 1.00 kg
<cr><lf>
