Chapter 5 Deployment of the CPU 821xDPM
CPU ADAM 821x
5-6
ADAM 8000 Manual CPU 821x – Rev 1.1
For the project engineering of the Profibus-DP master in the CPU
821xDPM the following preconditions have to be fulfilled:
•
STEP
7 manager from Siemens is installed.
•
When using Profibus-DP slaves of the Systems ADAM 8xxx from
Advantech: GSD-files are included into the hardware configurator
•
There is a transfer possibility between configuration tool and CPU
821xDPM.
The hardware configurator is a part of the STEP
®
7 projecting tool from
Siemens. It serves the project engineering. The modules that may be con-
figured here are listed in the hardware catalog.
For the deployment of the Profibus-DP slaves of the Systems ADAM 8xxx
from Advantech you have to include the modules into the hardware catalog
by means of the GSD-file from Advantech.
The following section describes the single steps of the project engineering.
•
Create a new project System 300V.
•
Add a profile rail from the hardware catalog.
•
In the hardware catalog the CPU with Profibus master is listed as:
Simatic300 >
CPU-300
>
CPU315-2DP
>
6ES7 315-2AF01-0AB0
•
Insert the CPU 315-2DP (
6ES7 315-2AF01-0AB0
).
•
Type the Profibus address of your master.
•
Click on "DP", choose the operating mode "DP master" under
object
properties
and confirm your entry with OK.
•
Click on "DP" with the right mouse button and choose "add master
system". Create a new Profibus subnet.
Preconditions
Install Siemens
hardware
configurator
Project
engineering
CPU 821xDPM
Create a virtual
Profibus system
