CPU ADAM 821x
Chapter 4 Deployment of the CPU 821xNET
ADAM 8000 Manual CPU 821x – Rev 1.1
4-37
1
3
4
6
7
5
2
This is where you activate an active write connection.
In the same way as for the READ active command, you declare the desti-
nation block from where the data has to be transferred in addition to the
data required for establishing the connection.
Input fields
Remote Host
IP address of the station to which you wish to write the
data.
Remote Port
Port address of the remote station.
Local Port
Port address of your own (local) station. To simplify
matters you can specify the same port address for remote
and local.
Time (10mSec)
Definable interval for cyclic write operations. The
minimum timer value for cyclic writes is 5.
OrgKennung
Type of destination block.
DBNr
Number of destination block.
AnfAdr
Start address of destination block.
Len
Word length of destination block.
Tick-box
UDP
This tick mark selects unsecured communications. No
virtual connections are used by unsecured communication
links. In this manner you may only display UDP
messages.
Buttons
Connect
The connection is established and prepared for the write
operation.
Write this
Data entered into the ASCII field is transferred to the CP
via the connection that was established by means of
Connect
.
WriteA tab
[1] port
data
[2]
establish a connection
[3]
transfer the data via the
connection
[4]
result-code of the write job
[5]
information window for the
status of the connection
[6] source
data
[7]
ASCII-text that has to be
transferred to the CP
