EN
© Adam Equipment Company 2012
11
700660229revA-Jul12
5)
Press the
[Print]
key to change the setting for the printing control and
press
[Zero]
to save.
6)
The current setting for data transmission speed “Bps” will now be
displayed.
600, 1200, 2400, 4800, 9600 are available. Default is 9600.
Press the
[Print]
key to change the setting and press
[Zero]
to save.
Test will be displayed, press the
[Print]
key to send a test print
command.
7) Press
[Zero]
to save,
[cm/ft]
to exit, then
[kg/lb]
to select the next
parameter.
6.4
PRINTING
DETAIL
CONTROL
FFFF4
4
4
4
P
P
P
P
T
T
T
T
S
S
S
SEEEELLLL
The MUW can be programmed to provide a customised print out to give you
the readings you require. Doctor, patient, DiSP1, DiSP2, DiSP3 details can all be
enabled or disabled to suit the information you need to see.
1) Switch on the scale then press the
[kg/lb]
key during the self-checking
test of the display.
2) The display will show the first function
F1
F1
F1
F1
EL.
EL.
EL.
EL.
3) Press the
[kg/lb]
key to select
F4
F4
F4
F4
P
P
P
P
T
T
T
T
S
S
S
SEEEELLLL
and then
[Zero]
to enter and
show the current settings.
SETTING
DESCRIPTION
SELECTIONS
dr.Id
Doctors Id number
ON/OFF
PAt.Id
Patient Id number
ON/OFF
DiSP 1
Display 1 shows the weight of the patient
ON/OFF
DiSP 2
Display 2 shows the height of the patient
ON/OFF
DiSP 3
Display 3 shows the BMI of the patient
ON/OFF
CAL
Print out following calibration
ON/OFF
d-t
Date and time
ON/OFF
