Adam Equipment Nimbus NBL Serie, Operating Manual

Page: 36 / 264

EN
© Adam Equipment Company 2015
34
3016612481Rev2.00-Jul15
Select a code for one of the pre-set data formats as detailed above.
The next line shows: “
LINE 02 LINE 02 LINE 02 LINE 02 ” “ TIME TIME TIME TIME ” - prints time.
Only one item can be entered per line.
Continue until the formatting of the form is complete. There are 15 lines of possible data.
After the 15th line has been set or “
END END END END ” has been selected, the balance will return to the
“ SERIAL SERIAL SERIAL SERIAL ” Sub-menu.
Press [Mode] to advance to setting of the next menu, or press [
0/T  ] to return to
normal weighing.
13.5 SETUP PARAMETERS
The user parameters that control the balance are shown under the setup menu. When
“
SE
SE SE
SEtV
tV tV
tVP
PP
P ” is displayed, press the [Setup] key. The options for each parameter can be
scrolled through by using the [Up] or [Down] key. Use the [Up] and [Down] keys to
increase or decrease the value for setting. Press [Setup] to accept the setting and
advance to the next item in the menu
Press [Mode] to advance to setting of the next parameter or [
0/T  ] to return to normal
weighing
LANGV LANGV LANGV LANGVAGE AGE AGE AGE
Select menu language from available options.
TIME TIME TIME TIME
Set real-time clock using the keypad numeric entry method. HH:MM:SS.
DATE FORM DATE FORM DATE FORM DATE FORM
Set date display format using the keypad numeric entry method. European
(DD/MM/YY) or USA format (MM/DD/YY).
DATE DATE DATE DATE
Set date using the keypad numeric entry method. YEAR, MONTH, DAY,
WEEKDAY
INST ID INST ID INST ID INST ID
Enter a user number to identify this balance on print output. Range 1 -
9999999
BV BV BV BVZZER ZZER ZZER ZZER
On = Enable sound alerts
OFF = Disable sound alerts
BAC
BAC BAC
BACKLIT
KLIT KLIT
KLIT
AUTO = Always on unless balance is not used for 5 minutes, then turns off
automatically until key is pressed or weight >20d is detected.
ON = Permanently on
OFF = Permanently off
POWER POWER POWER POWER
On = Power-saving mode enabled. Sets the inactivity period after which unit
will go into stand-by mode. Range 1 – 9 minutes.
OFF = Power-saving mode disabled.
FILTER FILTER FILTER FILTER
The filter tracks and averages weighing to produce the most accurate
measurement and smooth out instabilities. A higher filter number means more
filtering and a slower, but possibly more stable and accurate response. A
lower number will produce a quicker measurement but it may be less stable
and accurate. Range 1 (low) to 9 (high).
Recommended value for normal use: 5
FILLING FILLING FILLING FILLING
ON = A fine filter which provides better performance when weighing whilst
pouring a substance such as liquid or powder into a container on the pan.
OFF = No filtering. Recommended setting for normal use.
STABILI STABILI STABILI STABILI
Set a value to be used to determine balance stability. The number
corresponds to the number of divisions the weight reading is fluctuating by. A