Adam Equipment CKT 16, Service Manual

Page: 14 / 22

© Adam Equipment Company 2020 11
9.0 FACTORY PARAMETERS
The factory parameters are used for setting the capacity and basic settings.
To access the factory or dealer menu, switch off the scale and switch on again. Press the
[Tare]
↵
key during the initial self-test.
The display will ask for a code number, “P_ _ _ _”.
Factory menu: Enter the number “1946” and press [Tare] ↵.
Dealer menu: Enter the number “1966” and press [Tare]
↵.
The dealer menu will allow you to access the ADC counting display and User calibration
options. For user calibration, please follow the instructions outlined in the calibration section
of the manual.
The factory menu comprises of a wider variety of settings and options such as language,
currency, decimal and linear calibration settings.
The display will show the first parameter “ADCnt” . To scroll through other parameters press
the numeric keys [1] or [6] and the [Tare]
↵
key to confirm.
9.1 A/D COUNT
To enter this parameter, press the [Tare]
↵
key when “ADCnt” is shown.
This parameter allows you to view the A/D counts from the internal A/D converter. This can
be an aid to service.
Press the [Tare]
↵
key to return to the PARAMETER menu.
9.2 RESET
To enter this parameter, press the [Tare]
↵
key when “Reset” is shown.
This parameter allows you to reset count values.
Press the [Tare] ↵ key to return to the PARAMETER menu.
9.3 C-Con
This setting will allow the user to see how many times the machine has been calibrated.
(Calibration control)
To enter this parameter, press the [Tare]
↵
key when “C-Con” is shown.