Adam Equipment CCEU-20, Manual

Page: 40 / 48

38 | P a g e © Adam Equipment Company 2017

The display will show the following:
“
CAL
” “
0.000
” “
12345
”
The number in the TOTAL window is the number of internal
counts representing the zero weight, from the analog to digital
converter within the scale.

Make sure no other weights are on the scale. Press the [Total]

key to set the zero point. The display will show:
“
LoAd 1
” “
10
” “
23456
”

Place 10kg mass on the scale and then press the [Total]

key

The display will then show:
“
LoAd
” “
20
” “
23456
”

Place 20kg mass on the scale and then press the [Total]

key

The display will then show:
“
SPAN
” “
PASS
” “ ”

After few seconds it will show the next function.
“
F10
” “
FACt
” “
SEt
”