background image

 

13.0 REPLACEMENT PARTS AND ACCESSORIES 

 

If you need to order any spare parts and accessories, contact your supplier or Adam 
Equipment. A partial list of such items is as follows- 

 

 

Power Supply Module 

 

Main Power cord 

 

Replacement Battery 

 

Stainless Steel Pan 

 

 

Range of Platforms 

 

In use cover 

 

Printer, etc. 

 

 

 
 

14.0 SERVICE INFORMATION 

 

This manual covers the details of operation. If you have a problem with the 
scale that is not directly addressed by this manual then contact your supplier for 
assistance. In order to provide further assistance, the supplier will need the 
following information which should be kept ready: 

 

 

A.

 

Details of your company

    -Name of your company: 
    -Contact person’s name: 
    -Contact telephone, e-mail,  
     fax or any other methods: 
 

B.

 

Details of the unit purchased

  

     

(This part of information should always be available for any future 

correspondence. We suggest you to fill in this form as soon as the unit is 
received and keep a print-out in your record for ready reference.) 

            

Model name of the scale: 
 

CBDa_______ 

Serial number of the unit: 
 

 

Software revision number  
(Displayed when power is first turned on): 

 

Date of Purchase: 

 

Name of the supplier and place: 

 

         
  

 

  © Adam Equipment Company 2005 

 

32

Summary of Contents for CBD 100a





































Reviews: