Adam Equipment AEA Series, Operator'S Manual

Page: 14 / 24

© Adam Equipment Company 2000 14
4.4 Using Statistic in the Density Mode
If it is necessary to keep statistics of the results from Density test it is possible by setting the
Statistics parameter to On when in the Density Submenu. The procedure for collecting the
data is the same whether Solid Density or Liquid Density is selected.
When using statistics the user should:
1. Set the Statistics mode to be ON.
2. Delete previous statistics data.
3. Enter the Density mode.
4. Collect the data by pressing the Print key.
5. After the data is collected, look at the results of statistics and print them.
6. Return to any of the weighing modes.
During the Density test the display will show the number of items stored in the statistics
program, (N= number of results)
Each time the PRINT/ENTER is pressed it will increase the number of items stored by one.
PROCEDURE
Enter Density Mode submenu
Set the cursor next to the
Statistics parameter.
M3 for Liquid Density or M5
for Solid Density
Enter 03 Statistic parameter