Ada ZCT AUTO, Operating Manual, Page: 9 / 40

MEASUREMENT FOUNDATION
ZCT AUTO
9
4) Maximum value / minimum value measurement:
Press the “MAX/MIN” key for a short time to enter maximum value measuring mode, at this time the LCD screen will dis-
play MAX prompt and display the measured maximum value results in data value displaying area. Press the “MAX/MIN”
key once again for a short time to enter minimum value measuring mode, at this time the LCD screen will display MIN
prompt and display the measured minimum value results in data value displaying area. Press the “MAX/MIN” key once
again for a short time to enter normal measuring mode.
5) Backlight display:
Press “UNIT” key for a long time to enter LCD backlight display mode. At this time, the LCD screen will display (5)
prompt, the entire LCD screen is lit. Press “UNIT” key for a long time once again to exit from backlight display. The LCD
backlight display will automatically shut down if the instrument is not operated for 15 seconds.
6) Data storage:
After automatic storage is set in menu function settings, data for each time will be stored automatically. If the number of
automatic recording exceeds the maximum recorded number of the instrument 2000 times, then the instrument will auto-
matically exit from data storage.
7) Check record data:
Press the “MENU” key for a short time to enter checking record data mode. When no data is stored, the displaying area for
data values on LCD screen will display “---” , the displaying area for data record number will display “---” . Meanwhile,
“LoadNo” prompt will be displayed. For about 2 seconds, the instrument will automatically enter test function. When there
is any data storage, the instrument will automatically display the last recorded data and recorded number. Meanwhile,