Ada ZCT AUTO, Operating Manual, Page: 10 / 40

MEASUREMENT FOUNDATION
ZCT AUTO
10
“LoadNo” prompt will be displayed. For about three seconds, “LoadNo” prompt blinks; then press the ”▼” key to reduce
checking record number and the corresponding stored data. If you press the ”▼“ key for long, then the checking record
number and the corresponding stored data will be reduced automatically. Press the ”▲“ key to increase checking record
number and the corresponding stored data. If you press the “▲“ key for long, then the checking record number and the
corresponding stored data will be increased automatically. If the maximum record number 2000 is exceeded, then the instru-
ment will automatically return to the irst record number and the corresponding stored value; press this key once again to
exit from this mode.
8) Clear recorded data:
Method 1: Press the Trigger key without release before starting up the instrument, meanwhile press the “MENU” key to
Startup, release the “MENU” key until the LCD screen displays CLR, records clearing will be completed for about 8 sec-
onds. Note that the measuring head can not be got close to metal.
Method 2: By restoring factory settings (refer to menu function setting in details.)
9) Menu functions setting:
Press the Trigger key for a long time to enter menu functions setting. The default state is ASA1. ASA1 represents storing
data automatically; at this time, press the “MAX” key, you can set it as ASA0. ASA0 represents that data can not be stored.
Press it again to set it as ASA1; press the “MENU” key again to enter the next menu calibration mode. At this time, the LCD
screen will display “CODE” (the users with factory setting need not care), then press the “MENU” key again to enter the
next menu factory settings. At this time, the LCD displays DEF? (restore factory settings). Press the “UNIT” key to execute
restoring factory settings APA1 and clearing all the recorded data, shutdown is completed. If press the “MENU” key again
under factory settings mode, then enter measuring mode.