Ada ZCT AUTO, Operating Manual, Page: 6 / 40

MEASUREMENT FOUNDATION
ZCT AUTO
6. Select measuring modes
1) Prepare test pieces which are about to be tested.
2) Startup: press the trigger key till the instrument is started up.
3) Install battery and inspect.
7. Battery installation and inspection
1) Clench the instrument body by your left hand.
Press the battery gate with your right thumb and
open the battery gate as the direction of arrow as
shown below: (with illustration).
2) Put the 9V battery correctly into battery com-
partment with attention to battery polarity; then
close the battery gate as shown below: (with il-
lustration)