ADA INSTRUMENTS TemPro VISION, Operating Manual

Page: 6 / 27

TemPro VISION
6
Open the battery cover: unlock the retainer screw. Insert the batteries.
Observe the polarity. Put the battery cover. Screw the retainer screw.
Operation
Press and hold button (MENU) for 5 seconds to turn on or turn off the meter. Switch on the instrument.
Then press and hold button (MENU) for 1 second to enter thre menu. Only five options are showen on the
display at one time. Press buttons (7) to scroll functions through the display menu. Press button (MENU)
again to return to the normal measurement mode.
Select the function in the menu and press button (SELECT). Press button (7) to select the necessary
setting. Press button (SELECT) to exit setting mode.
Measurements
The temperature measurement of the center area is shown
at the top of the display. The emissivity setting is also shown
at the top of the display. When the hot and cold markers are
turned on, move the product until the hot or cold spot coin-
cides with the middle measurement area. Point the product at
an object that is likely to be hotter or colder than its surround-
ings for best results.
Insert / replace batteries
Center
Cold
Hold spot