AD Boivin SH-MAN-2007, Shop Manual

Page: 169 / 251

ENGINE (CYLINDERS / HEAD / BASE / EXHAUST) 7 - 15
All Models
▼
CAUTION
Always install new circlips. To minimize the effect of
acceleration forces on circlip, install each circlip so the
circlip break is at 6 o’clock as illustrated. Use appropriate
piston circlip installer.
Use circlip installer (P/N 529 035 686) to install new mono-hook
circlips no. 16. Insert circlip into support so that, when installed
in piston groove, the tab faces upward.
With round end of pusher, position circlip perpendicularly to the
support axis.
With the other end of the pusher, push circlip into the
support groove.