Acutron HC-30, Installation And Operation Manual

Page: 15 / 19

When the power supply for the mainframe is normal, automatic startup at specified time every day whether it is in
startup or shutdown status, and an alarm with a duration of 60 seconds will be given to all extensions.
Four management levels can be set for this system. In case of multi-level management, level-one management
mainframe is set to 01, level-two management mainframe to 02, level-three management mainframe to 03, and
level-4 management mainframe to 04 (when an extension calls, and level-one management mainframe does not
respond within the specified duration, the extension will automatically call level-two management mainframe, if
level-two management framework does not give any response within set time, the extension will automatically call
level-three management mainframe, so is level four. Levels 1, 2, 3 and 4 management mainframes have an equal
authority to talk with any extension).
9. Mainframe level setup (take the common level for an example)
01
Model:HC
Tier Level
Model:HC
After the previous step, press the Function
key to enter the mainframe level setup.
Tiering Setup
Model:HC
10. Ward bed setup (take extension 13 set to bed 03 of ward 204 as an example)
Sickbed Setup
Model:HC
After the previous step, press the Function
key to enter the ward bed setup
14
061 02 2 061 02 2
061 02 2 061 02 2
061 02 2
When connected to the dot matrix corridor display and it is necessary to display room and bed numbers, the
following means can be employed for setup.
FUNCTION
MNTR ALL PWR
FUNCTION
MNTR ALL PWR
Tier Level
FUNCTION
MNTR ALL PWR
FUNCTION
MNTR ALL PWR
Press the Function key to
enter the setting for minutes
Model:HC Model:HC
Auto On Setup Auto On Setup
PWR
FUNCTION
MNTR ALL
FUNCTION
PWR ALL MNTR
Press the or key to adjust to 30
Press the or key to enter setup Press the or key to adjust to 01 common level
Press the or key to enter setup Select the extension routing switches
of channels 1 and 3 in order
Select extension routing switches
of channels 2, 10, and 4 in order Select extension routing switches
of channels10, and 3 in order And select the extension routing
switch of channel 12
....
Setup
....
Setup
....
Setup
....
Setup
....
Setup