Acurus ARIES User Manual Download Page 6 | Manualshive

Page: 6 / 20

Acurus ARIES User Manual Download Page 6

RS-232 and Ethernet Connectors:

Both RS-232 and a

dedicated 2.1 input (input #2) is included for passing through
down-mixed surround audio from sources such as TVs,
gaming systems or set top boxes. The subwoofer input
(“sub”) can be set to pass directly to the subwoofer out (see
section entitled “audio settings menu”).

#

!
!
!
!
!
!
!
!
!
!

AC Power Inlet:

The main AC input on the Aries is a module

on the lower right hand side of the rear panel that
accommodates an IEC-type plug and also houses the main
AC protection fuse(s) in a slide-out drawer.

#

!
!
!
!
!
!
!
!
!
!

Expansion Port:

Aries supports hardware upgrades and

added connectivity features through an expansion port.
Adding and configuring expansion cards should be
performed only by Acurus support or through authorized
Acurus dealers.

Unbalanced 2.1 Output:

A line-level 2.1 output may be used to

drive an external amplifier and/or a system subwoofer. This

variable output is affected by the Aries volume level and

balance settings. The sub output is affected by the subwoofer

settings (see section entitled “audio settings menu”).

#

#
#

!
!
!
!
!
!
!
!
!
!

IR In Connector:

An infra-red remote (IR) input jack (“ir Rx”)

supports connection to the IR target included with Aries. The

IR target should be placed in the line-of-site from the IR

remote used to control the Aries. This feature allows the
freedom to locate the Aries in an enclosed cabinet or behind

a wall as needed.

#

#
#
#
#
#
#
#
#
#

!
!

12V Trigger Connectors:

A 12V trigger input jack is located

below the ir Rx jack to allow for triggering the Aries on/off

from an external source such as a power conditioner or AV

receiver. Two 12V trigger outputs allow the Aries to trigger

external amplifiers on and off (see section entitled “trigger

settings menu”).

!

!
!
!
!
!
!
!
!
!
!
!

#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#

#
#
#
#
#
#
#
#
#
#

6

ACURUS ARIES INTEGRATED AMPLIFIER USER GUIDE

Revision 10302014

Document 1000189

NOTE: Consult with your authorized Acurus dealer or Acurus
support regarding pricing and availability of expansion
options for your Aries.

"

«
...
4
5
6
7
8
...
»

Summary of Contents for ARIES





















Reviews:

No comments