Acurus ARIES, User Manual, Page: 12 / 20

Subwoofer On/off and Level Trim: The level of the
subwoofer can be adjusted up or down via the “+” and “-”
touch buttons. +/- 15dB adjustment range is available. To
the right of the subwoofer level trim is a subwoofer on/off
control. Defaults are off and “0”.
#
#
#
#
#
#
#
#
#
Subwoofer Internal vs. External Pass-Through (2.1 input
only):
Input #2 includes an optional subwoofer input from
an external 2.1 audio source device. Normally, the Aries
subwoofer output signal is derived from the left and right
input channels. For input #2, by enabling the external
subwoofer pass through (“int” button), the external sub
input signal is passed through to the subwoofer output.
Default is off or no pass-through.
#
#
#
#
#
#
#
Back Arrow: To return to the settings page rather than the
home page, simply touch the back arrow. This applies to all
sub-menus.
#
#
#
#
#
#
#
Mode Settings Sub-menu: Aries can be used in a pre-amp
only mode, disabling the internal amplifier. This can be
useful for night-time listening through headphones or for
disabling a second zone when an external amplifier is
driven.
"
Mode Settings Icon "
!
#
#
Simply select power amp “on” or “off” to enable or disable
the internal amplifier in the Aries. Default is amplifier
enabled.
#
#
Network Settings Sub-menu: Touching the Network Settings
Icon brings up the sub-menu below:
!
!
Network Settings Icon "
#
#
#
#
On this screen, the IP address of the Aries is displayed
along with network detection status. “No connection”
indicates that a network cable is disconnected or there is a
fault elsewhere with a switch or router.
#
#
#
#
#
#
#
#
#
!
#
Display Brightness Sub-menu: Touching the Display
Brightness icon Icon brings up the sub-menu below: #
!
Display Brightness Icon
"
#
#
#
#
On this screen, the brightness of the Aries display can be
altered from low to medium to high based on user
preference.
#
#
! ! !!
12 ACURUS ARIES INTEGRATED AMPLIFIER USER GUIDE
Revision 10302014 Document 1000189