background image

22 

Specifications

 

TEMPERATURE RANGE 

Outdoor: -40

º

F to 158

º

F; -40

º

C to 70

º

Indoor: 32

º

F to 122

º

F; 0

º

C to 50

º

HUMIDITY RANGE 

Outdoor: 1% to 99%

 

Indoor: 16% to 98%

 

WIND SPEED 

0 to 99 mph; 0 to 159 kph

 

WIND DIRECTION 
INDICATORS 

16 points 

RAINFALL 

0 to 99.99 in; 0 to 9999 mm

 

WIRELESS RANGE 

330ft / 100m 

depending on home construction materials

 

OPERATING FREQUENCY 

433 MHz

 

POWER 

Display: 4.5 vdc, 250mA power adapter 

6 x AA alkaline batteries (optional)

 

Sensor:  4 x AA alkaline or lithium batteries

 

DATA REPORTING 

Wind Speed: 18 second updates; Direction: 30 seconds

Outdoor temperature & humidity: 36 second updates

Indoor temperature & humidity: 60 second updates

 

FCC Information 

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1- This device may NOT cause harmful interference, and

2- This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause 

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular instal-

lation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. 

Such modifications could void the user authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation of the device.

 

Summary of Contents for 01500

























Reviews: