uu
Remote Transmitter Care
u
Replacing the Button Battery
566
Main
tenan
ce
If the indicator does not come on when the button is pressed, replace the battery.
1.
Remove the built-in key.
u
As a convenience, lightly place masking
tape over the remote buttons to hold
them in place.
2.
Remove the upper half of the cover by
carefully prying on the edge with a coin.
u
Wrap a coin with a cloth to prevent
scratching the transmitter.
3.
Press down on the center of the assembly
and remove the battery.
u
When removing the button battery, be
careful not to touch parts around it.
4.
Make sure to replace the battery with the
correct polarity.
Models with two-way keyless access remote
1
NOTICE
The Remote transmitter is equipped with two
batteries: A standard replaceable CR2032 coin
button battery and an integral non-replaceable
rechargeable battery. To prevent permanent damage
to the rechargeable battery, replace the CR2032
battery every three to four years.
Models with two-way keyless access remote
Battery type: CR2032
Battery
19 ACURA RDX-31TJB6000.book 566 ページ 2018年4月26日 木曜日 午後4時51分
Summary of Contents for RDX 2019
